+86-13764513349
Product Name:Temperature Controllers Series TS4
Category:Accessory
 The TS4 Series Temperature Controllers - one of the most cost effective temperature controlling solution with PID functions; Dual display 4 Digit, 100ms high speed sampling has both SSR output and relay output are supported to realize effective and economical controlling; 2 alarm output; Voltage models is 100-240 VAC

Features
Application
Download
The TS4 Series Temperature Controllers - one of the most cost effective temperature controlling solution with PID functions; Dual display 4 Digit, 100ms high speed sampling has both SSR output and relay output are supported to realize effective and economical controlling; 2 alarm output; Voltage models : 100-240 VAC
 
ㆍBuilt-in PID auto tuning function
ㆍSelect the output action : reverse action/direct action 
ㆍAlarm (ALH, ALL, LBA)
ㆍUpper/Lower limit setting limitation function
ㆍSetting data lock function
ㆍInput compensation function
ㆍDecimal point display function
ㆍSupport thermocouple and RTD multi-model sensor input

Technical Features

Series TS4-M TS4-C TS4-H TS4-B
Power
suuply
AC Power 100-240VAC~50/60Hz
AC/DC Power 24VAC~50/60Hz, 24-48VDC
Allowable voltage range 90 to 110% of rated voltage
Power
consumption
AC Power Max. 5VA(100-240VAC 50/60Hz)
AC/DC Power Max. 5V(24VAC 50/60Hz), Max. 3W(24-48VDC)
Display method 7 segment (PV: red, SV: green), other display part(green, red) LED method
Character
size
PV(W×H) 7.0×15.0mm 9.5×20.0mm 7.0×14.6mm 11.0×22.0mm
SV(W×H) 5.0×9.5mm 7.5×15.0mm 6.0×12.0mm 7.0×14.0mm
Input
type
RTD DIN Pt100Ω, Cu50Ω (Allowable line resistance max.5Ω per a wire)
TC K(CA), J(IC), L(IC), T(CC), R(PR), S(PR)
Display
accuracy
RTD At room temperature(23 ± 5): (PV ± 0.5% or ±1, select the higher one) ± 1 digit
Out of room temeperature range: (PV ± 0.5% or ±2
, select the higher one)± 1 digit
For TM4S-
-P, add ±1 by accuracy standard.
TC
Control
output
Relay 250VAC~3A 1a
SSR 12VDC= ±2V 20mA Max
Alarm output AL 1, AL2 Relay: 250VAC~ 1A 1a
Control method ON/OFF control, P, PI, PD, PID control
Hysteresis 1 to 100/ (0.1 to 50.0/)
Proportional band(P) 0.1 to 999.9/
Integral time(I) 0 to 9999 sec.
Derivative time(D) 0 to 9999 sec.
Control period(T) 0.5 to 120.0 sec.
Manual reset 0.0 to 100.0%
Sampling period 100ms
Dielectric
strength
AC power 2000VAC 50/60Hz 1 min.(between input terminal and power terminal)
AC/DC Power 1000VAC 50/60Hz 1min.(between input terminal and power terminal)
Vibration 0.75mm amplitude at frequency of 5 to 55Hz in each X, Y, Z direction for 2 hours
Relay life
cycle
Mechanical OUT: Over 5,000,000 times, AL1/2: Over 5.000,000 times
Electrical OUT: Over 200,000 times(250VAC 3A resistive load)
AL 1/2: Over 300,000 times(250VAC 1A resistive load)
Insulation resistance Min. 100MΩ(at 500VDC megger)
Noise Square-wave noise by noise simulator(pulse width 1µs) ±2KV R-phase and S-phase
Memory retention Approx. 10 years (when using non-volatile semicnductor memory type)
Environment Ambient temp. -10 to 50, Shotage: -20 to 60
Ambient humi. 35 to 85%RH, Shotage: 35 to 85%RH
Insulation type Double insulation or reinforced insulation (mark: qdielectric strength between 
the measuring input part and the power part: AC power 2kV, AC/DC power 1kV)
Weight Approx. 147g
(approx. 100g)
Approx. 203g
(approx. 133g)
Approx. 194g
(approx. 124g)
Approx. 275g
(approx. 179g)

 
Copyright © 2010-2011 NIETZ. All Right Reserved. 沪ICP备11012040号
Яндекс.Метрика