|
ITEM
|
FC1000 Multi-function Micro Drives
|
|
Basic function
|
Maximum frequency
|
Vector control: 0～599Hz
V/F control： 0～3200Hz
|
|
Carrier frequency
|
0.5kHz～16kHz
The carrier frequency can be automatically adjusted based on the load features.
|
|
Input frequency resolution
|
Digital setting：0.01Hz
Analog setting: maximum frequency×0.025%
|
|
Control mode
|
Voltage/Frequency control (V/F)
Sensorless flux vector control (No PG)
Closed loop vector control (Have PG)
|
|
Startup torque
|
G Type：0.5Hz/150%（No PG）；
P Type：0.5Hz/100%
|
|
Speed range
|
1：100（No PG）
|
|
Speed stability accuracy
|
±0.5%（No PG）
|
|
Torque control accuracy
|
±5%（Have PG）
|
|
Overload capacity
|
G type: 60s for 150% of the rated current, 3s for 180% of the rated current.
P type: 60s for 120% of the rated current, 3s for 150% of the rated current
|
|
Torque boost
|
Fixed boost
Customized boost 0.1%–30.0%
|
|
V/F curve
|
Straight-line V/F curve
Multi-point V/F curve
N-power V/F curve (1.2-power, 1.4-power, 1.6-power,1.8-power, square)
|
|
V/F separation
|
Two types: complete separation; half separation
|
|
Ramp mode
|
Straight-line ramp
S-curve ramp
Four groups of acceleration/deceleration time with the range of 0.0–6500.0s
|
|
DC braking
|
DC braking frequency: 0.00 Hz to maximum frequency
Braking time: 0.0-100.0s
Braking action current value: 0.0%–100.0%
|
|
JOG control
|
Jog frequency range：0.00Hz~50.00Hz. JOG acceleration/deceleration time0.0s~6500.0s。
|
|
Onboard Multiple preset speeds
|
It implements up to 16 speeds via the simple PLC function or by input terminal states
|
|
Onboard PID
|
It realizes process-controlled closed loop control system easily.
|
|
Auto voltage regulation (AVR)
|
It can keep constant output voltage automatically when the mains voltage changes.
|
|
Over-voltage/ Over-current stall control
|
The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to over-voltage/over-current.
|
|
Rapid current limit
|
It helps to avoid frequent over-current faults of the inverter.
|
|
Torque limit and torque control
|
It can limit the torque automatically and prevent frequent over-current tripping during the running process.
|
|
Individualized function
|
High performance
|
Control of asynchronous motor is implemented through the high-performance current vector control technology.
|
|
Instantaneous stop doesn’t stop
|
The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time.
|
|
Timing control
|
Timing range 0.0Min～6500.0Min
|
|
Communication methods
|
Modbus RS-485, Modbus TCP, EtherCAT, Profibus-DP, Profinet, CANopen
|
|
Operation
|
Running command channel
|
Given by the panel, control terminals,
|
|
Serial communication port, can be switched by many ways
|
|
Frequency source
|
10 kinds of frequency source, given by digital analog voltage, analog current, Pulse, serial port. can be switched by many ways
|
|
Auxiliary frequency source
|
There are ten auxiliary frequency sources. It can implement fine tuning of auxiliary frequency and frequency synthesis
|
|
Input terminals
|
5 digital input terminals, one of which supports up to 100 kHz high-speed pulse input;
|
|
1 analog input terminal, supports 0-10V voltage input or 4–20 mA current input.
|
|
Output terminal
|
1 digital output terminal
|
|
1 relay output terminal
|
|
1 analog output terminal :that supports 0–20 mA current output or 0–10 V voltage output
|
|
Display and operation panel
|
LED display
|
It displays the parameters.
|
|
Key locking and
|
It can lock the keys partially or completely and define the
|
|
function selection
|
function range of some keys so as to prevent mis-function.
|
|
Protection mode
|
Motor short-circuit detection at power-on, input output phase loss protection, over-current protection, over-voltage protection, under voltage protection, overheat protection and overload protection.
|
|
Environment
|
Installation location
|
Indoor, avoid direct sunlight, dust, corrosive gas, combustible gas, oil fog, steam, drip or salt.
|
|
Altitude
|
Lower than 1000 m (Lower the grades when using higher then 1000m)
|
|
Ambient temperature
|
-10°C ～40°C (Lower the grades if the ambient temperature is between 40°C and 50°C)
|
|
Humidity
|
Less than 95%RH, without condensing
|
|
Vibration
|
Less than 5.9m/s2（0.6g）
|
|
Storage temperature
|
－20℃~＋60℃
|