+86-13764513349
Product Name:NZ2000 Serie compacto vectorial sensorless Convertidores de frecuencia
Category:Variadores de Frecuencia
Serie NZ2000 accionamiento vectorial sin sensor compacto - Capacidad de sobrecarga es del 150% (100%) de la corriente nominal, 3s para el 180% de la corriente nominal; Hay diez sources.It frecuencia auxiliar se puede aplicar el ajuste fino de frecuencia auxiliar y síntesis de frecuencia. Dos tipos de V / F separación: separación completa; medio de separación ... .. 

Tensión de alimentación,V
Potencia, кW
220
0.4 - 3.7
380
0.4- 450




Features
Application
Download
Resumen de especificaciones técnicas:

Item NZ2000
Standard functions Control mode V/F(Voltage / Frequency) control
Sensorless flux vector control (VC)
Maximum frequency Vector control: 0–320 Hz
V/F control: 0–3200Hz
Carrier frequency  1.0–16.0 kHz
The carrier frequency is automatically adjusted based on the load features.
Input frequency esolution Dgital setting: 0.01 Hz
Analog setting: 0.025% of maximum frequency 
Startup torque G type: 0.5 Hz/150% (VC);
P type: 0.5 Hz/100% (VC)
Speed range 1:100 (VC)
Speed stability accuracy ± 0.2% (VC)
Torque control  accuracy ± 20% 
Overload capacity G type: 60s for 150% of the rated current, 3s for 180% of the rated current.
P type: 60s for 120% of the rated current, 3s for 150% of the rated current.
Torque boost Auto boost
Customized boost 0.1%–30.0%
V/F  curve Line V/F curve
Multi-point V/F  curve
N-power V/F curve (1.2-power, 1.4-power, 1.6-power,1.8-power, square)
V/F  separation Two types: complete separation; half separation
Ramp mode Straight-line ramp
S-curve ramp
Four groups of acceleration/deceleration time with the range of 0.0–6500.0s
DC braking DC braking frequency: 0.00 Hz to maximum frequency
Braking time: 0.0–100.0s
Braking action current value: 0.0%–100.0%
JOG control JOG frequency range: 0.00–50.00 Hz
JOG acceleration/deceleration time: 0.0–6500.0s
Onboard multiple preset speeds It implements up to 16 speeds via the simple PLC function or combination of terminal states
Onboard PID It realizes process-controlled closed loop control system easily.
Auto voltage regulation (AVR) It can keep constant output voltage automatically when the mains voltage changes.
Overvoltage/ Overcurrent stall control The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to overvoltage/over current.
Torque limit and control It can limit the torque automatically and prevent frequent over current tripping during the running process.
 Power dip ride through The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time.
 Rapid current limit It helps to avoid frequent over current faults of the AC drive.
 High performance Control of asynchronous motor are implemented through the high-performance current vector control technology.
 Timing control Time range: 0.0–6500.0 minutes
 Communication methods RS485 (MODBUS-RTU) 
Protection mode Motor short-circuit detection at power-on, input/output phase loss protection, over current protection, overvoltage protection, under voltage protection, overheat protection and overload protection.
Input and output  Input terminal 6 digital input terminals, one of which supports up to 100 kHz high-speed pulse input.
2 analog input terminals, one of which only supports 0–10 V voltage input and the other supports 0–10 V voltage input or 4–20 mA current input.
 Frequency source Digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting.
 Auxiliary frequency source There are ten auxiliary frequency sources.It can implement fine tuning of auxiliary frequency and frequency synthesis.
 Running command source Operation panel/Control terminals/Serial communication port
You can perform switchover between these sources in various ways.
Output terminal 1 digital output terminal
1 relay output terminal
1 analog output terminal :that supports 0–20 mA current output or 0–10 V voltage output
operation on the operation panel LED display It displays the parameters.
Key locking and function selection It can lock the keys partially or completely and define the function range of some keys so as to prevent mis-function.
Environment Installation location Indoor, free from direct sunlight, dust, corrosive gas,combustible gas, oil smoke, vapour, drip or salt.
Altitude Lower than 1000 m
Ambient temperature  -10°C 40°C (de-rated if the ambient temperature is  between 40°C and 50°C)
Humidity Less than 95%RH, without condensing
Vibration Less than 5.9 m/s(0.6 g)
Storage temperature  -20°C60°C
Tools machine, Food machine, Elevator, packaging equipments, pump, fan.
Convertidores de frecuencia, variador de frecuencia, inversores de frecuencia, Servoconvertidor, Servomotores,Soft Starter, Inversores solares, Motores paso a paso, Controlador de motor paso a paso, Reductores, Reactancia de entrada, Reactancia de salida, Reactancia DC, Unidades frenado, Filtros de entrada, Resistencias de frenado, Banco de Resistencias, Reductores y Variadores
Copyright © 2010-2011 NIETZ. All Right Reserved.
Яндекс.Метрика