+86-13764513349
FC1000 - Компактный преобразователь частоты
Тип:Частотный преобразователь
FC1000 компактен, простота в пуск, быстр и прост в программировании. Его гибкая конструкция позволяет использовать любой асинхронный двигатель и с постоянными магнитами.
Семейство FC1000 предлагает компактный привод переменного тока, который сочетает в себе простоту управления с высокоэффективным управлением для асинхронных двигателей переменного тока с постоянными магнитами. Прочная компактная конструкция, различные режимы управления, поддержка EtherCAT, Modbus, связь Profibus-DP, встроенный фильтр ЭМС, 24DC, функция STO, карты расширения PG.

  BROCHURE  
 
      Тех. Описание
    Применение
Скачать
 Основные технические характеристики серии FC1000
 
- Диапозон мощности 0,4–55 кВт
- Легко читаемый светодиодный дисплей.
- Легко подключите свой компьютер, чтобы запрограммировать устройство с питанием.
- Скалярное (V/F) и векторное (VVW) управление
- Перегрузочная способность: 150% тока в течение 60 сек.
- Фильтр радиопомех, 24 В постоянного тока, встроенный PID
- Функция безопасного отключения крутящего момента, конструкция терминала с защитой от пальцев.
- Внешняя клавиатура с интерфейсом RJ45, поддержка доплаты и автоматического резервного копирования параметров.
- Протоколы связи: Modbus RTU (RS-485) и CAN, EtherCAT, Profibus-DP, Modbus TCP

ITEM

FC1000 Multi-function Micro Drives

Basic function

Maximum frequency

Vector control0599Hz

V/F control 03200Hz

Carrier frequency

0.5kHz16kHz

The carrier frequency can be automatically adjusted based on the load features.

Input frequency resolution

Digital setting0.01Hz

Analog setting: maximum frequency×0.025%

Control mode

Voltage/Frequency control (V/F)

Sensorless flux vector control (No PG)

Closed loop vector control (Have PG)

Startup torque

G Type0.5Hz/150%No PG);

P Type0.5Hz/100%

Speed range

1100No PG

Speed stability accuracy

±0.5%No PG

Torque control accuracy

±5%Have PG

Overload capacity

G type: 60s for 150% of the rated current, 3s for 180% of the rated current.

P type: 60s for 120% of the rated current, 3s for 150% of the rated current

Torque boost

Fixed boost

Customized boost 0.1%–30.0%

V/F curve

Straight-line V/F curve

Multi-point V/F curve

N-power V/F curve (1.2-power, 1.4-power, 1.6-power,1.8-power, square)

V/F separation

Two types: complete separation; half separation

Ramp mode

Straight-line ramp

S-curve ramp

Four groups of acceleration/deceleration time with the range of 0.0–6500.0s

DC braking

DC braking frequency: 0.00 Hz to maximum frequency

Braking time: 0.0-100.0s

Braking action current value: 0.0%–100.0%

JOG control

Jog frequency range0.00Hz~50.00Hz.  JOG acceleration/deceleration time0.0s~6500.0s

Onboard Multiple preset speeds

It implements up to 16 speeds via the simple PLC function or by input terminal states

Onboard PID

It realizes process-controlled closed loop control system easily.

Auto voltage regulation (AVR)

It can keep constant output voltage automatically when the mains voltage changes.

Over-voltage/ Over-current stall control

The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to over-voltage/over-current.

Rapid current limit

It helps to avoid frequent over-current faults of the inverter.

Torque limit and torque control

It can limit the torque automatically and prevent frequent over-current tripping during the running process.

Individualized function

High performance

Control of asynchronous motor is implemented through the high-performance current vector control technology.

Instantaneous stop doesn’t stop

The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time.

Timing control

Timing range 0.0Min6500.0Min

Communication methods

Modbus RS-485, Modbus TCP, EtherCAT, Profibus-DP, Profinet, CANopen

 Operation

Running command channel

Given by the panel, control terminals,

Serial communication port, can be switched by many ways

Frequency source

10 kinds of frequency source, given by digital analog voltage, analog current, Pulse, serial port. can be switched by many ways

Auxiliary frequency source

There are ten auxiliary frequency sources. It can implement fine tuning of auxiliary frequency and frequency synthesis

Input terminals

5 digital input terminals, one of which supports up to 100 kHz high-speed pulse input;

1 analog input terminal, supports 0-10V voltage input or 4–20 mA current input.

Output terminal

1 digital output terminal

1 relay output terminal

1 analog output terminal :that supports 0–20 mA current output or 0–10 V voltage output

Display and operation panel

LED display

It displays the parameters.

Key locking and

It can lock the keys partially or completely and define the

function selection

function range of some keys so as to prevent mis-function.

Protection mode

Motor short-circuit detection at power-on, input output phase loss protection, over-current protection, over-voltage protection, under voltage protection, overheat protection and overload protection.

Environment

Installation location

Indoor, avoid direct sunlight, dust, corrosive gas, combustible gas, oil fog, steam, drip or salt.

Altitude

Lower than 1000 m (Lower the grades when using higher then 1000m)

Ambient temperature

-10°C 40°C (Lower the grades if the ambient temperature is between 40°C and 50°C)

Humidity

Less than 95%RH, without condensing

Vibration

Less than 5.9m/s20.6g

Storage temperature

20℃~60℃


 USER MANUAL  
Применение
 
- Машины в целом
- Центробежные насосы
- Технологические насосы-дозаторы
- Вентиляторы / вытяжка
- Мешалки / Смесители
- двери лифта
- Конвейерные столы с роликами
- Грануляторы/упаковщики
- ротационные фильтры
- Специальные машины для небольших процессов
Copyright © 2010-2011 NIETZ. All Right Reserved.
Яндекс.Метрика