+86-13764513349
Product Name:Active Power Filter (APF)
Category:Power Electronics
The active power filter (APF) is mainly composed of controller, isolation switch (circuit breaker), contactor, IGBT, driving circuit, protection system, fuse, connection reactor, DC capacitor, etc. The controller measures phase A, C reactive power(current), produces control signal, drives IGBT on/off and produces harmonic and reactive current same as system harmonic current but in opposite phase to filter system harmonic, reduce reactive power and keep system power factor approximately at 1.
Features
Application
Download
Our APF equipment is module structure, there are two types Wall Mounted and cabinet mounted. The Wall Mounted type is preferred to be used in equipment improvement which is very convenient to install.  
 
The NIETZ Modular Active Harmonic Filter series are suitable for applications of all types, providing harmonic mitigation, load balancing and step-less reactive power compensation for inductive and capacitor loads.  

Specification of APF, SVG
 
Item APF SVG (kVa)
Specifications Module specification 30 50 75 100 150 30 50 100
Number of parallel possibilities 16
Input Work voltage 400v/690(-20%~+15%)
Work frequency 50Hz(-10%~+10%)
Current transformer 100:5~10000:5
Output 600 width 450A 300 Kvar
800 width 900A 600 Kvar
Function To compensate the harmonic 2-50 times 2-13 times (50 percent of the rated current)
Harmonic filtration rate >97%
Reactive power compensation  -1~+1 adjustable
Compensate for three imbalances 100%Full compensation for imbalance
communication protocol communication mode RS232; RS485; Modbus; TCP/IP optional
communication interface Rs485, net mouth
upper machine software Have, all parameters are set though the upper computer
Failure warning Have, Record up to 500 alarm messages
Monitoring Support each module independent monitoring
Technical indicators Full response time <10ms
Active loss <3%
the cooling way Intelligent air cooling
Noise <60dB
sampling/control frequency 200kHZ
Equivalent Switch frequency 43.2kHZ
cutoff frequency of current loop 6.4kHZ
protection function overpressure, under voltage, over hearting, Over current, a short current, etc. 
CT Installation position The load side/The grid side optional
Mechanical properties hanging size The wall hanging is the same size as the module
Module weight 25Kg(≤75A/50kvar)50kg(≥100A/100Kver)
color Fine orange lines. 
Environmental requirement Working temperature  -10ºC~+45ºC
An altitude of <1500 Meters
Relative humidity <99% no lon
protection grade Ip20

Dimension info of Wall mounted power Module
 



Select Models Guide of APF

Products 400V,  Active Power Filter (APF)
Power of Module 30A 50A 75A 100A 150A
Type of mounting  either will do Wall Mounted and Rack 
Dimension (WxDxH) 600x800x2200 800x800x2200
800x800x2200 800x1000x2200
800x1000x2200 1000x800x2200
1000x800x2200 1000x1000x2200
1000x1000x2200 /
Number of parallel possibilities  max. 16 units
Max. power for width 600 models 6x75A=450A /
Max. power for width 800 models / 6x150A=900A


Select Models Guide of SVG

Products 400V,  Static Var Generator (SVG)
Power of Module 30 kVa 50 kVa 100 kVa
Compensate for unbalanced current 45A 75A 150A
Compensate for Harmonic current 25A 40A 80A
Type of mounting  either will do Wall Mounted and Rack 
       
Dimension (WxDxH) 600x800x2200 800x800x2200
800x800x2200 800x1000x2200
800x1000x2200 1000x800x2200
1000x800x2200 1000x1000x2200
1000x1000x2200 /
Number of parallel possibilities  max. 16 units
Max. power for width 600 models 6x50kVa=300kVa /
Max. power for width 800 models / 6x100kVa=600kVa

 
 
Copyright © 2010-2011 NIETZ. All Right Reserved. 沪ICP备11012040号-1
Яндекс.Метрика